Nicole

"Nicole"
Scott Antworth, 2010
27" x 37"
(image burned on birch, framed with oak)

This piece will be available in June, 2010, at:

http://www.mainecrafterscollective.com

Bio of a Wood-burning: "Nicole"

From painters to novelists, every artist I've ever known finds inspiration in the oddest moments--and in the strangest hours. From becoming mesmerized by the way light shatters on an ice-sheathed branch the morning after a winter storm to the "what-if" moments every fiction writer has when the turn of a phrase becomes a spark that becomes a flame, we live for those "Eureka Moments."

A few weeks back, poking about on Facebook at 3:00 in the morning, I was responding to some sentiments posted by one of my wife and I's dearest friends. Her daughter, Nicole, had responded to the same post and I remembered she'd been giving at least some thought to modeling. So, feeling like a trespasser the whole way, I followed a hunch and got myself rewarded. Artists do that. We watch and poke about, waiting for those moments when an image speaks straight to our sensibilities.

Nicole has an affection for Marilyn and, like Monroe, tends to photograph very nicely. A number of things struck me about this photograph. Watching the waves and being lost in thought is an immediately accessible (and thus, engaging) theme and the original photo conveys the feel of that experience rather than merely its image. The energy (e.g. the waves are in motion, she is clearly in mid-stride, etc.) is both present and under-stated, striking a complimentary relationship with the mood of this piece. Were Nicole standing motionless or in full sprint, that balance would have been ruined.

From a pyrographic standpoint, some very specific challenges are presented. This piece has very few hard lines. Most of the surface space is actually a strata of "soft spaces" (water, wet sand, etc.), some in motion, some static, that have to transition one to the next seamlessly...or you've just spent a whole lotta hours making firewood. Water is always tricky, no matter which medium we're working in. With this particular piece, the importance of getting it right is somewhat elevated in that it is not background here; it's a specific player in this mix.

Look at it this way: if 80% of the surface space ends up looking half-assed, what was the point of the exercise?

My second "eureka moment" came while roughing out the fabric of the sweatshirt. I started (and ended) with Nicole's image to help buy me some time in figuring out how to tackle the surf. At this point...
...I began "seeing the waves," or most specifically how to effect them, while "draping cloth." Remember, our minds tend to interpret images contextually: we see a shirt because our model's wearing one. We see water because that's what she's looking at. If you isolate the small of her back, this texture (sharp lights and rolling, gradient shades) could easily be the surface of the water to either side of her. I have been representing water in burns for as long as I've been burning...and it still struck me as a small revelation.

Sand isn't terribly difficult to represent, so long as one takes some care to not inadvertently lay in the accidental patterns that stop in to say hello when we make a lot of repetitive strokes. The human eye is reliably good at detecting these patterns (think of a house painter's brush stroke straight up the middle of an otherwise pristine wall..) The key is to keep your burner tip moving as quickly and randomly as you can as you work the shades to their desired texture.

With the strata of wet sand (marking the reach of the surf), I found it helpful to work the surface in a few passes, essentially "layering" the effect. To mute the burn and to help give this section its final look, I lightly scuffed the surface with a piece of 240-grit sandpaper.


The foam of the seascape presents itself in two forms: as the gentle (and lateral) belt at the tip of the incoming surface and in bursts as the water collides with the rocks a bit farther in. It is most essential to remember, when presenting such things as sea foam, is that there are no hard edges here. They have to be soft, jagged, and utterly devoid of outline.

I usually achieve this effect by focusing on what's behind, say, the flying bits of foam and leaving those irregularly-shaped flecks largely unburnt. The effect of foam is thus created by everything around it rather than the foam itself...though texturing it still must be attended to. In the above photo, this effect has been largely accomplished along the left side of these rocks. For contrast, the right side still had not yet been attended to.

Throughout my time with this burning, I struggled with composition. I knew I wanted something to be happening in the deep left of the piece. I just didn't know what. Initially I had conceived a small sloop under sail, creating its own trough of foam. I eventually discarded this idea, as well as the idea that replaced it, a seagull or two in flight, for the same reason: I felt both would convey too dynamic an energy, which would conflict with the pensive tone that first attracted me to this image...
This being Maine, I opted for a lighthouse theme. From a compositional standpoint, Nicole and the lighthouse create a complimentary relationship, the two "vertical" images in what is otherwise horizontal composition. The understated balance between the two helps to carry the same reflective energy that caught my eye, back in that moment of inspiration...

Autumn Lovers

"Autumn Lovers"
Scott Antworth, 2010
26" x 26"
(Image burned on birch, framed with oak)

This piece is available here:

http://www.mainecrafterscollective.com/painting-with-fire/

Wood-burning 101: Pyrography & the Butt-Ugly Panel

In past posts, I've given some attention to how surface imperfections and flaws need to be planned for. It is both an aggravation and an attraction for the pyrographic artist. A pyrographer often must affect a more conscious relationship with wood than many artists do their respective mediums. Wood is far more than a canvas. Each piece is as unique as a fingerprint and each brings to our table is own peculiarities in densities, moisture and grain. A pyrographic artist learns quickly to train his hand, and with it the hot tool, to respond to how the wood surface is acting as he works. In planning an image we hope to burn, we often find ourselves with a pyrographic truism: what can't be ignored must be used.

A variety of species tool very well with a woodburner. Bass and poplar will always be personal favorites of mine. Owing to its relative inexpensiveness and that most of my pieces have ended up on furniture items, most of my time has been spent with pine. Generally speaking, pine takes a burner very nicely and usually has accommodating grain features. It can also be nightmarish when it comes to knots and surface defects. These days, when working with pine, I most often let the panel decide what it will become. Nature presents us with certain challenges. Letting our imaginations run rampant with them is precisely part of the magic for the pyrographic artist.
We often find ourselves with panels that are just ugly. This one, for example...


This panel is actually a single board, 4 feet long and with widths as wide as 2. It is just under two inches thick. Both the top and bottom edges are "live edge," meaning that edge had been the exterior surface of the tree. It had bark...and often becomes stunning furniture. This particular panel is destined to become a coffee table. We just have to get it well past its current ugly duckling stage.

The most obvious challenge presented us here are this panel's knots. There are 3 bands of them, right up the middle and on both sides. They are too large and defined to be ignored, so they must be used. Laid out in "bands" as they are, they strike me as just calling out to become trees. I frequently like using knots to this end as they incorporate themselves very readily into such images.
They are not, however, without their issues. Most often, there will be moisture (i.e. dried/drying sap) associated with these knots, even in very seasoned wood. When your burner tip comes into contact with this, the heat draws it to the surface and you will hear it sizzle. Notice the smoke rolling back from my burner here:



Knots and their surrounding surfaces are denser and tend to burn (i.e. darken) more slowly. The melted sap, which caramelizes as we go, helps slow the process even further. The result, incorporating what would be a very intrusive knot into the image itself, is usually worth the added patience.

I've found that using a 25-watt burner to be invaluable. Pine knots can be hard on the more-delicate 20-watt hot tool (my preferred burner). The heavier 25-watt tool not only takes the abuse better but also darkens the surface more quickly in the bargain. In the above picture, this stouter hot tool acquits itself nicely in helping to "form" the knot into the end-grain of a broken tree limb.

With the trees (as good a starting point as any...) established, the picture is taking shape. At this point, the problems which made this panel such an initial challenge, are actually resolved. All that's left is straight-forward pyrography and composition...



(My work companion, wholly unimpressed with the artistic process...)



In bringing things closer to completion, I found myself with an opportunity to truly "paint with fire" ...or at least to use open flame to affect some of the heavier shades along the larger tree trunks.


Such opportunities present themselves very infrequently for me. Flame is an exceedingly unpredictable tool. It's rather like using a broad axe instead of a scalpel. One tends to bite the inside of one's cheek (not that I, uhm, er, ever do...) when taking open flame to a piece in which he's already invested so many hours. It is a gamble. Flame can char too deeply without warning. Occasionally your piece catches fire.

Each piece presents its unique headaches and challenges. Finding their resolution is part of the magic of pyrography. The character of a piece, its knots and defects, inform the vision. Together, they are bound only by the limits of our imaginations...

For Emily

The Wood-burned Coffee Table (Deer & Covered Bridge)

This table, along with the blanket chests I'll be spotlighting a bit later, shows off the work Farmer Dave and I do together. It's pretty straight-forward: I burn the panel, Dave builds the table...

...and what a table! Dave fashioned this out of oak and even a cursory inspection reveals how exacting Dave can be. It's flawless...



This table measures 37"x19"x19", is priced at $475, and is available through Painting With Fire (mudcatz@hotmail.com).

Wooden Ships: "The Atlantic" (Farmer Dave)

For as long as I've known him (almost 20 years), Farmer Dave has built boats. Boats smaller than your hand. Boats as large as your sofa. With Maine's famous maritime history, nautical themes have never been farther away than our wood piles. This, a boat Dave has done periodically almost as long as we've known each other, is one of Dave's most popular renderings...

"The Atlantic"

"Winner of the 1905 Kaiser's Cup.

Built in 1903, the sleek, steel-hulled Atlantic not only won the prestigious trans-Atlantic race, she set a record, unbeaten until 1997, of 12 days, 4 hours, and 1 minute. Powered by a steam auxiliary engine, she sported a spcial low-drag propeller and folding funnel, both of which were removed for racing.

Measuring 185 feet long, with 3 towering masts, she was an impressive sight along the east coast as she cruised. Eventually she became impossible to keep up and came to rest as a dying hulk in a small New Jersey harbor."

Dave's rendering is a bit smaller (41"x41"x5"), though in front of you, it's still an expansive undertaking, with a painstaking detail.



Each one of these knots is hand-tied. Farmer Dave, who has large, fairly arthritic hands, will spend hours upon hours tying these lines, which has always struck me as an impressive display of endurance. Dave refuses to "cheat," determined that all the details measure up to his satisfaction...


This amazing ship is available through Painting With Fire, for $475. Please direct any inquiries to me, Scott, at mudcatz@hotmail.com .